The Wasserstein AA Battery Extension is a great accessory for the Blink Outdoor and Blink Indoor cameras. This extension delivers extra power to your Blink cameras by backing up the 2 AA batteries in your camera with 4 more AA batteries. It’s especially useful if you have a camera that is hard to reach or if you want to extend its battery life or avoid frequent swaps.
In this post, we will walk you through the installation process of the Wasserstein AA Battery Extension for Blink Outdoor and Blink Indoor cameras.
Step 1: Remove the battery cover from your Blink camera
To do this, simply loosen the screw on the back cover and then pry the camera open.
Step 2: Connect the AA battery pack to the camera
Snap in the battery pack to the back of the camera. Use the arrow indicator as a guide to know the correct orientation, and then push the battery pack in until you hear a snap.
Step 3: Insert the batteries
Insert the 4 AA batteries into the battery pack.
Step 4: Replace the back cover
Attach the camera’s back cover to the battery pack. Then, tighten the screw to secure it.
Step 5: Test the camera
Turn your Blink camera on and make sure that it is working correctly. The battery pack should now power the camera.
Step 6: Mount the camera
Mount the camera back to its original position. Use a durable and weather-resistant mount like the Wasserstein Adjustable Metal Wall Mount to get the best viewing angles.
Installing this battery extension is easy and straightforward. With this accessory, you can double the power of your Blink Indoor/Outdoor Camera and get greater flexibility when it comes to camera placement.
Say goodbye to frequent battery swaps and hello to twice the battery life with the Wasserstein AA Battery Extension.