How to Install the Wasserstein Solar Charger and Mount for Blink Video Doorbell

by Joel Manansala

Do you own a Blink Video Doorbell and are tired of replacing batteries or struggling to find an available power outlet for your device? If so, consider getting a Wasserstein Solar Charger and Mount, a convenient and eco-friendly solution that lets you power your Blink Video Doorbell with sunlight.

Here’s a step-by-step guide on how to install the Wasserstein Solar Charger and Mount for Blink Video Doorbell:

Before proceeding with the installation, note that the mount already has a built-in 2000-mAh battery. We recommend that you first leave the Solar Charger under direct sunlight for at least 8 hours for a full charge.

  1. Start by unpacking the Wasserstein Solar Charger and Mount package and make sure all parts are included.
  2. Remove the Blink Video Doorbell from its original mount and take out the existing batteries.
  3. Attach the Wasserstein Mount onto the wall or surface using the two larger screws already included in the package.
  4. Choose your preferred backplate and attach it to the mount using the two smaller screws.
  5. Attach the Blink Video Doorbell onto the mounting bracket of the mount by sliding it down. The doorbell should click into place.
  6. Once the Blink Video Doorbell is properly attached to the mounting bracket of the Solar Charger Mount, you should see the red indicator light illuminate. This indicates that the doorbell is successfully receiving power from the Solar Charger Mount.
  7. Test the Blink Video Doorbell to make sure it is working properly. It should make a ringing sound when the button is pressed.
  8. Open the Blink mobile app on your smartphone and go to the Doorbell Settings. The Battery indicator should show “OK”.

Congratulations! You have successfully installed the Wasserstein Solar Charger and Mount for Blink Video Doorbell. Now you can enjoy the benefits of an eco-friendly,  solar-powered doorbell that will bring you cost savings and convenience.

Here are a few additional tips to keep in mind:

  • For optimal charging performance, make sure the Solar Charger Mount is exposed to direct sunlight.
  • If you experience any issues with the Wasserstein Solar Charger and Mount, refer to the User Manual or contact the manufacturer for assistance.

The Wasserstein Solar Charger and Mount provides you with the ultimate convenience and peace of mind for your Blink Video Doorbell. With the Solar Charger and Mount, you can ensure that your doorbell is always powered and ready to go. Say goodbye to the hassle of constantly changing batteries or worrying about power outages!

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.