How to Install the Wasserstein Premium Smart Water, Temperature & Humidity Detector

by Joel Manansala

Water damage is any homeowner's worst nightmare, causing costly repairs and unnecessary stress. Imagine waking up to your newly renovated kitchen floor soaked in water - all because of a tiny leak that was left undetected. It's a scenario that could easily be avoided with one simple device: the Wasserstein Premium Smart Water, Temperature, and Humidity Detector. It uses an ultra-sensitive probe that can detect even the slightest moisture.


Before we get to the installation process, let's start by setting up the device through the Wasserstein app.

Step 1: Add Device to Wasserstein App

  1. Download the Wasserstein app on your smartphone or tablet. You can find it on the App Store for iOS devices or the Google Play Store for Android devices.
  2. Open the app and follow the on-screen instructions to create an account or log in if you already have one.
  3. Navigate to the "Add Device" section and select the Wasserstein Premium Smart Water, Temperature, and Humidity Detector.
  4. Follow the app prompts to connect the device to your Wi-Fi network.

Step 2: Reset the Device

  1. Twist the back of your Wasserstein sensor counterclockwise until it pops off.
  2. Locate the device's reset button and press and hold it until you see the blue LED light flashing.

Step 3: Connect to Wi-Fi

While the LED light is flashing, the device is in pairing mode. Use the Wasserstein App to complete the Wi-Fi setup by following the on-screen instructions.

Step 4: Configure Settings

Adjust the water sensor’s settings accordingly. Toggle which sensor(s) you want to activate. You can also modify the temperature and humidity thresholds in the Humidity & Temperature Settings.



With the device set up and connected to your Wi-Fi network, it's time to install it in your desired location.

Step 1: Mount the Holder to the Wall

  1. Choose an appropriate location on the wall where you want to install the Wasserstein sensor. Ensure it is within the Wi-Fi range for a reliable connection.
  2. Use screws to mount the holder to the wall securely. Place one screw through the front of the holder and secure it accordingly.

Step 2: Attach the Water Sensor

Click the Wasserstein water sensor onto the holder, ensuring it clicks into place securely.

Step 3: Connect the Probe Cable

Plug the probe cable into the cable port on the Wasserstein water sensor. Make sure it's connected snugly.

Step 4: Connect the USB Cable (Optional)

Optionally, you can plug the provided USB cable into the USB port on the Wasserstein water sensor to connect it directly to a wall socket.

5. Test the Water Sensor

Before you complete the installation, test the water sensor to ensure it's functioning correctly.

  1. Fill a small container with water to create a small puddle.
  2. Carefully place the probe of the Wasserstein water sensor into the puddle of water.
  3. If the water sensor has been installed correctly, it will detect the water and emit a beep to signal its activation.

Receive 24/7 alerts for any leaks or fluctuations in temperature or humidity. With the Wasserstein Premium Smart Water, Temperature, and Humidity Detector, you can now protect your home from significant damages and costly repairs.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.