How to Install the Wasserstein Horizontal Adjustable Mount for Google Nest Doorbell (Battery)

by Joel Manansala

Modern smart doorbells like the Google Nest Doorbell give you a simple and safe way to monitor your front entrance. With its wireless design powered by a rechargeable battery, you can place it virtually anywhere around your home.

The Nest Doorbell features two-way audio, a crisp HD resolution, and real-time alerts. However, some users might find that the default mounting position doesn't offer their desired viewing angle.

That's where the Vertical Adjustable Angle Mount for Google Nest Doorbell comes in! This accessory lets you easily adjust your Nest Doorbell vertically from 0° to 10°, ensuring you get the best vantage point for monitoring your doorstep.

Let's dive into the installation process and learn how to enhance your Nest Doorbell's performance with the Wasserstein Horizontal Adjustable Mount.

Step 1: Choose the Mounting Location

Decide on the ideal location to mount your Google Nest Doorbell. It should offer a clear view of your entryway while being easily accessible for maintenance. If you have previously installed it on your wall, take it down first.

Step 2: Install the Wall Plate

Hold the Vertical Angle Mount’s Wall Plate against the chosen mounting location on the wall. Use a level to ensure it is perfectly straight. Use a pencil or marker to mark the positions for screw holes on the wall, then drill the holes. Line up the wall plate's screw holes with the marked positions and attach it to the wall using the provided long screws (or screws with wall anchors).

If your doorbell is hardwired, thread the wires through the hole in the wall plate.

Step 3: Attach the Vertical Angle Mount onto its Wall Plate

Take the Vertical Angle Mount and align it with the Wall Plate installed on the wall. Ensure that the clasps inside these two plates are properly aligned. With the Vertical Angle Mount properly aligned, apply firm pressure and push hard until you hear a distinct "click" sound. This confirms that the mount is securely attached to the Wall Plate.

Step 4: Screw the Doorbell Backplate onto the Vertical Angle Mount

Take the Doorbell Backplate and place it onto the Vertical Angle Mount. Align the screw holes on the backplate with the corresponding holes on the mount. Using the provided short screws, start screwing the backplate onto the Vertical Angle Mount. Make sure to tighten the screws securely but be sure to avoid over-tightening.

Step 5: Attach the Doorbell to the Vertical Angle Mount

Align the circle at the bottom of the doorbell to the hole at the bottom of the base plate. Push the doorbell in, then down, until you feel it click into place.

If your doorbell is hardwired, connect the wires accordingly.

Step 6: Choose your Desired Angle

With your Google Nest Doorbell securely attached to the Vertical Angle Mount, adjust the angle to your desired position. Once you have selected your desired angle, locate the tiny screws on the left and right sides of the mount and tighten them.

And that’s it! You've successfully installed the Wasserstein Horizontal Adjustable Mount for Google Nest Doorbell. Now, you can enjoy a customized and secure view of your entryway.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.